Everything You Need To Know About Whole House Water Filtration Systems


Are you concerned about the quality of the water that comes out of your taps? You're not alone. In fact, a whole host of contaminants can end up in your home's water supply, including lead, chlorine, and bacteria. Here's what you need to know about installing a whole house water filtration system.

What is a whole house water filtration system?

A whole house water filtration system is installed on the main water line entering your home. These systems are designed to filter out all of the contaminants in your water, including chlorine, lead, bacteria, and more.

Why do you need a whole house water filtration system?

While many homeowners limit their use of a water filtration system to the kitchen sink, there are many reasons why you might want to consider installing a whole house water filtration system instead, including:

  • Contaminants. Whole house water filtration systems ensure that all of the water in your home is clean and free of contaminants.
  • Stains. Hard water can leave behind unsightly orange stains on dishes, clothing, and even on your exterior siding from your sprinkler system. A water filtration system will help to reduce or eliminate these stains.
  • Smells. If your water has an unpleasant smell, a water filtration system can help to remove that odor.
  • Damage to fixtures and appliances. Hard water can damage plumbing fixtures and appliances over time. A filtration system will help to protect your investment.

Are there different types of filtration systems?

Yes, there are several different types of water filtration systems available on the market, including:

  • Reverse osmosis systems. These are typically called RO systems and work by forcing water through a semipermeable membrane that filters out contaminants.
  • Carbon filtration systems. These systems use activated carbon to filter out contaminants from your water.
  • UV filtration systems. As the name suggests, these systems use ultraviolet light to kill bacteria and other contaminants in your water.
  • Deionization systems. These systems work by removing charged ions from your water, leaving behind only clean, filtered water.

Additionally, some water filtration systems are multi-stage, meaning they combine two or more of the above filtration method to remove as many impurities from your water as possible.

Who installs filtration systems?

Your general contractor can install both an under-the-sink water filtration system as well as a whole house water filtration system for you.

If you're interested in installing a whole house water filtration system in your home, be sure to contact a filtration company, such as Aquafeel Maryland, for more information today.


28 June 2022

Finding Incredible Contractors

After we realized that we wanted to build our dream home, we didn't waste any time looking for a team of general contractors. We wanted to find experts that really understood what they were doing and who could see our vision, so we talked with dozens of contractors. It was an exhausting search, but by the time we found the right team, we knew that we were in good hands. Within a few short months, our project was underway, and we felt great about the progress. This blog is all about finding great contractors who can help with everything from design decisions to ground preparation.